National Certificate in Electrical Engineering
This course develops your ability to work with electrical power systems through sound theory, supervised installation and testing.
About the course
This course develops your ability to work with electrical power systems through sound theory, supervised installation and testing. Learning combines technical study with practical tasks relevant to Southern African organisations and communities.
What you'll learn
Interpret electrical circuits and equipment information.
Perform authorised, supervised installation or testing tasks using safe procedures.
Evaluate test results and document compliance with the supplied specification.
Requirements
Entry requires a relevant National Foundation Certificate or Ordinary Level (O Level) school qualification. English Language is required.
African Kalanga is a compulsory graduation subject in every year of this programme. BMIT confirms the approved entry route, any recognition of prior learning and access to required practical facilities before enrolment.
Course Content
The programme combines supporting studies, specialist subjects and practical integration. Each subject below includes its learning focus, outcomes, practice and assessment.
3 learning levels 26 subjects
Select a subject to read its learning outcomes, main topics, practical task and assessment.
Specialist subjects
Africa Indigenous Language: African Kalanga 101Compulsory graduation subject · Year 1
Develop African Kalanga through foundations for engineering, science and technology. Practise with authentic tasks, feedback and reflection across the programme year.
Learning outcomes
- Use African Kalanga accurately for Year 1 study and practice.
- Explain language choices to the intended audience.
- Revise your work using speaker and facilitator feedback.
Main topics
- Pronunciation
- Everyday vocabulary
- Listening
- Reading and respectful introductions
Practical task
Record a short introduction and explain its meaning to a peer.
Assessment
Submit the practical work, a brief reflection and evidence of language review. Assessment checks meaning, audience fit and improvement after feedback.
Entrepreneurship, Creativity and Innovation 101Compulsory core module · Level 1
Identify a real need, study the people affected and develop a responsible idea for a product, service or process. Apply this learning to National Certificate in Electrical Engineering through an authentic brief and feedback from an appropriate audience.
Learning outcomes
- Investigate a defined opportunity and explain the evidence behind it.
- Develop and refine a creative response that fits the people and setting.
- Evaluate feasibility, ethical implications and the quality of the result.
Main topics
- Opportunity recognition
- Creative problem framing
- Community and user research
- Ethics and inclusion
- Idea generation and selection
Practical task
Investigate a need related to National Certificate in Electrical Engineering. Interview or observe intended users with consent, compare possible responses and present one justified concept.
Assessment
Submit an opportunity brief, research notes, a concept sketch and a reflection on feedback. Assessment considers the quality of the evidence, the response to feedback, feasibility and your individual explanation.
African History and Pan Africanism 101Compulsory core module · Level 1
Study African history through oral, written and archaeological evidence. Examine the diversity of African societies, knowledge and exchange, then trace the emergence of Pan African ideas about identity, solidarity and self-determination.
Learning outcomes
- Place selected African societies and events within a supported historical timeline.
- Compare historical sources and identify perspective, evidence and uncertainty.
- Explain the foundations of Pan Africanism and the contributions of Africans and the diaspora.
Main topics
- Historical inquiry, chronology, oral traditions and source evaluation
- African civilisations, states, trade, livelihoods and knowledge systems
- Southern African history, including Mapungubgwe and Great Zimbabwe
- Slavery, the African diaspora and changing ideas about identity
- Origins of Pan Africanism, solidarity, self-determination and cultural expression
Practical task
Create an annotated timeline or digital learning poster on a selected African society or historical development. Compare at least two credible sources and explain one connection with your field of study.
Assessment
Submit the timeline or poster, an annotated source list and a short explanation of the evidence. Assessment considers chronology, historical accuracy, source judgement and the clarity of your interpretation.
Learning resources
Electrical Engineering Technology 1
Study the behaviour and interconnection of electrical and electronic circuits. Practice centres on a circuit-analysis and low-voltage testing portfolio, drawing on electrical quantities and circuit relationships and components, symbols and device behaviour. You will record findings, justify decisions and check measurement technique, circuit assumptions and repeatability.
Learning outcomes
- Explain circuit behaviour using a diagram and relevant quantities.
- Measure a supervised training circuit and compare results with predictions.
- Locate a fault using a documented sequence of checks.
Main topics
- Electrical quantities and circuit relationships
- Components, symbols and device behaviour
- Analogue and digital signal concepts
- Circuit construction and measurement
- Fault isolation and interpretation
- Documentation, reliability and safe testing
Practical task
For Electrical Engineering Technology 1, prepare a circuit-analysis and low-voltage testing portfolio in a electrical power engineering setting. Use supplied records, a realistic simulation or authorised supervised practice. Include your working and checks of measurement technique, circuit assumptions and repeatability.
Assessment
Applied questions, a worked case and an individual explanation supported by calculations, diagrams or records.
Power Generation, Transmission, Distribution And Utilization
Study the generation, conversion and distribution of electrical energy. Practice centres on a power-system diagram and performance assessment, drawing on sources, conversion and energy balance and power circuits, machines and equipment. You will record findings, justify decisions and check load assumptions, energy consistency and the limits of the proposed work.
Learning outcomes
- Explain the main energy path through a defined power system.
- Interpret load and performance information using suitable calculations.
- Prepare an inspection or improvement proposal within an authorised training scope.
Main topics
- Sources, conversion and energy balance
- Power circuits, machines and equipment
- Load requirements and system diagrams
- Protection, isolation and operating responsibilities
- Measurement, losses and performance
- Inspection, maintenance and technical records
Practical task
For Power Generation, Transmission, Distribution And Utilization, prepare a power-system diagram and performance assessment in a electrical power engineering setting. Use supplied records, a realistic simulation or authorised supervised practice. Include your working and checks of load assumptions, energy consistency and the limits of the proposed work.
Assessment
Applied questions, a worked case and an individual explanation supported by calculations, diagrams or records.
Electrical Plant & Equipment Installation, Maintenance And Repair
Study the generation, conversion and distribution of electrical energy. Practice centres on a power-system diagram and performance assessment, drawing on sources, conversion and energy balance and power circuits, machines and equipment. You will record findings, justify decisions and check load assumptions, energy consistency and the limits of the proposed work.
Learning outcomes
- Explain the main energy path through a defined power system.
- Interpret load and performance information using suitable calculations.
- Prepare an inspection or improvement proposal within an authorised training scope.
Main topics
- Sources, conversion and energy balance
- Power circuits, machines and equipment
- Load requirements and system diagrams
- Protection, isolation and operating responsibilities
- Measurement, losses and performance
- Inspection, maintenance and technical records
Practical task
For Electrical Plant & Equipment Installation, Maintenance And Repair, prepare a power-system diagram and performance assessment in a electrical power engineering setting. Use supplied records, a realistic simulation or authorised supervised practice. Include your working and checks of load assumptions, energy consistency and the limits of the proposed work.
Assessment
Direct observation of the task, the completed output and oral explanation of the method.
Engineering Drawing And Electrical Circuit Designing
Study the communication of technical information through drawings and models. Practice centres on a checked drawing or model portfolio, drawing on drawing conventions, scale and dimensions and views, sections and projection. You will record findings, justify decisions and check dimensional consistency, completeness and usability by another person.
Learning outcomes
- Interpret a drawing using scale, dimensions and conventions.
- Produce coordinated technical views for a stated purpose.
- Check and revise a drawing set using recorded feedback.
Main topics
- Drawing conventions, scale and dimensions
- Views, sections and projection
- Interpreting a technical brief
- Manual and computer-aided drawing tools
- Detail coordination and revision control
- Checking drawings against measurements and specifications
Practical task
For Engineering Drawing And Electrical Circuit Designing, prepare a checked drawing or model portfolio in a electrical power engineering setting. Use supplied records, a realistic simulation or authorised supervised practice. Include your working and checks of dimensional consistency, completeness and usability by another person.
Assessment
Applied questions, a worked case and an individual explanation supported by calculations, diagrams or records.
Programmable Logic Controllers
Study the measurement and control of a system through sensors, processing and actuators. Practice centres on a measurement or control-loop investigation, drawing on measured variables and sensor characteristics and signal conditioning and data acquisition. You will record findings, justify decisions and check calibration evidence, response behaviour and stated operating limits.
Learning outcomes
- Select a measurement or control approach for a defined variable.
- Configure or analyse a supervised training loop.
- Evaluate response and document a justified adjustment.
Main topics
- Measured variables and sensor characteristics
- Signal conditioning and data acquisition
- Calibration, uncertainty and records
- Feedback, set points and response
- Controllers, interfaces and communication
- Testing, faults and operating limits
Practical task
For Programmable Logic Controllers, prepare a measurement or control-loop investigation in a electrical power engineering setting. Use supplied records, a realistic simulation or authorised supervised practice. Include your working and checks of calibration evidence, response behaviour and stated operating limits.
Assessment
Applied questions, a worked case and an individual explanation supported by calculations, diagrams or records.
Overhead &Underground Power Line Construction
Study the generation, conversion and distribution of electrical energy. Practice centres on a power-system diagram and performance assessment, drawing on sources, conversion and energy balance and power circuits, machines and equipment. You will record findings, justify decisions and check load assumptions, energy consistency and the limits of the proposed work.
Learning outcomes
- Explain the main energy path through a defined power system.
- Interpret load and performance information using suitable calculations.
- Prepare an inspection or improvement proposal within an authorised training scope.
Main topics
- Sources, conversion and energy balance
- Power circuits, machines and equipment
- Load requirements and system diagrams
- Protection, isolation and operating responsibilities
- Measurement, losses and performance
- Inspection, maintenance and technical records
Practical task
For Overhead &Underground Power Line Construction, prepare a power-system diagram and performance assessment in a electrical power engineering setting. Use supplied records, a realistic simulation or authorised supervised practice. Include your working and checks of load assumptions, energy consistency and the limits of the proposed work.
Assessment
Applied questions, a worked case and an individual explanation supported by calculations, diagrams or records.
Electrical Engineering Technology 2
Study the behaviour and interconnection of electrical and electronic circuits. Practice centres on a circuit-analysis and low-voltage testing portfolio, drawing on electrical quantities and circuit relationships and components, symbols and device behaviour. You will record findings, justify decisions and check measurement technique, circuit assumptions and repeatability.
Learning outcomes
- Explain circuit behaviour using a diagram and relevant quantities.
- Measure a supervised training circuit and compare results with predictions.
- Locate a fault using a documented sequence of checks.
Main topics
- Electrical quantities and circuit relationships
- Components, symbols and device behaviour
- Analogue and digital signal concepts
- Circuit construction and measurement
- Fault isolation and interpretation
- Documentation, reliability and safe testing
Practical task
For Electrical Engineering Technology 2, prepare a circuit-analysis and low-voltage testing portfolio in a electrical power engineering setting. Use supplied records, a realistic simulation or authorised supervised practice. Include your working and checks of measurement technique, circuit assumptions and repeatability.
Assessment
Applied questions, a worked case and an individual explanation supported by calculations, diagrams or records.
Electronics 1
Study the behaviour and interconnection of electrical and electronic circuits. Practice centres on a circuit-analysis and low-voltage testing portfolio, drawing on electrical quantities and circuit relationships and components, symbols and device behaviour. You will record findings, justify decisions and check measurement technique, circuit assumptions and repeatability.
Learning outcomes
- Explain circuit behaviour using a diagram and relevant quantities.
- Measure a supervised training circuit and compare results with predictions.
- Locate a fault using a documented sequence of checks.
Main topics
- Electrical quantities and circuit relationships
- Components, symbols and device behaviour
- Analogue and digital signal concepts
- Circuit construction and measurement
- Fault isolation and interpretation
- Documentation, reliability and safe testing
Practical task
For Electronics 1, prepare a circuit-analysis and low-voltage testing portfolio in a electrical power engineering setting. Use supplied records, a realistic simulation or authorised supervised practice. Include your working and checks of measurement technique, circuit assumptions and repeatability.
Assessment
Applied questions, a worked case and an individual explanation supported by calculations, diagrams or records.
Electronics 2
Study the behaviour and interconnection of electrical and electronic circuits. Practice centres on a circuit-analysis and low-voltage testing portfolio, drawing on electrical quantities and circuit relationships and components, symbols and device behaviour. You will record findings, justify decisions and check measurement technique, circuit assumptions and repeatability.
Learning outcomes
- Explain circuit behaviour using a diagram and relevant quantities.
- Measure a supervised training circuit and compare results with predictions.
- Locate a fault using a documented sequence of checks.
Main topics
- Electrical quantities and circuit relationships
- Components, symbols and device behaviour
- Analogue and digital signal concepts
- Circuit construction and measurement
- Fault isolation and interpretation
- Documentation, reliability and safe testing
Practical task
For Electronics 2, prepare a circuit-analysis and low-voltage testing portfolio in a electrical power engineering setting. Use supplied records, a realistic simulation or authorised supervised practice. Include your working and checks of measurement technique, circuit assumptions and repeatability.
Assessment
Applied questions, a worked case and an individual explanation supported by calculations, diagrams or records.
Foundations and shared practice
Entrepreneurship, Creativity and Innovation 201Compulsory core module · Level 2
Turn a promising idea into a testable proposal using evidence, creative methods and basic resource planning. Apply this learning to National Certificate in Electrical Engineering through an authentic brief and feedback from an appropriate audience.
Learning outcomes
- Investigate a defined opportunity and explain the evidence behind it.
- Develop and refine a creative response that fits the people and setting.
- Evaluate feasibility, ethical implications and the quality of the result.
Main topics
- Co-design and prototyping
- Value proposition
- Feasibility and costs
- Risk and responsible practice
- Testing and iteration
Practical task
Develop a small prototype or service model for a National Certificate in Electrical Engineering problem. Test it with relevant users, record feedback and revise the proposal.
Assessment
Submit a prototype, a feasibility note, user feedback and a record of revisions. Assessment considers the quality of the evidence, the response to feedback, feasibility and your individual explanation.
African History and Pan Africanism 201Compulsory core module · Level 2
Examine colonial change, resistance and liberation across Africa, with attention to Zimbabwe and South Africa. Compare Pan African movements, organisations and debates, including contributions from women, workers and diaspora communities.
Learning outcomes
- Analyse the effects of colonial rule on land, labour, institutions and social relations.
- Compare liberation movements and Pan African arguments using contextual evidence.
- Explain how different groups shaped independence, solidarity and debates about freedom.
Main topics
- Colonial rule, land, labour, education and forms of resistance
- Nationalism, liberation and the end of colonial rule and apartheid
- Pan African congresses, organisations and contrasting interpretations
- Women, labour movements and diaspora participation
- The Organisation of African Unity and debates about unity, sovereignty and development
Practical task
Develop a comparative case study of a liberation issue or Pan African debate relevant to Southern Africa. Use a historical document alongside a scholarly account and explain differences in purpose and interpretation.
Assessment
Submit the case study, a source comparison and a reflection on your conclusions. Assessment considers context, evidence, recognition of different perspectives and the quality of your argument.
Learning resources
Communication And Computer Skills
Study the use of digital tools to organise information and produce reliable work records. Practice centres on a linked set of documents, calculations and presentation files, drawing on files, folders, naming and version control and word-processing layouts and structured documents. You will record findings, justify decisions and check formula accuracy, consistency, readability and recoverability.
Learning outcomes
- Create and organise files for a defined work task.
- Use a spreadsheet or document tool to process information accurately.
- Check outputs and protect the underlying information.
Main topics
- Files, folders, naming and version control
- Word-processing layouts and structured documents
- Spreadsheet calculations and charts
- Presentation of findings and supporting evidence
- Data entry, validation and checking
- Access controls, backup and responsible information use
Practical task
For Communication And Computer Skills, prepare a linked set of documents, calculations and presentation files in a electrical power engineering setting. Use supplied records, a realistic simulation or authorised supervised practice. Include your working and checks of formula accuracy, consistency, readability and recoverability.
Assessment
Applied questions, a worked case and an individual explanation supported by calculations, diagrams or records.
Safety Health Environment Quality Management
Study the prevention of harm and the control of quality during vocational work. Practice centres on a task risk assessment, inspection record and improvement plan, drawing on hazard identification and exposure routes and risk assessment and control hierarchy. You will record findings, justify decisions and check whether controls address the identified hazard rather than relying on labels alone.
Learning outcomes
- Identify hazards and select controls appropriate to the task.
- Follow an agreed safe-work and quality-check procedure.
- Record an incident or defect and recommend corrective action.
Main topics
- Hazard identification and exposure routes
- Risk assessment and control hierarchy
- Safe work preparation and protective equipment
- Environmental impacts and waste handling
- Incident reporting and emergency communication
- Inspection records and corrective action
Practical task
For Safety Health Environment Quality Management, prepare a task risk assessment, inspection record and improvement plan in a electrical power engineering setting. Use supplied records, a realistic simulation or authorised supervised practice. Include your working and checks of whether controls address the identified hazard rather than relying on labels alone.
Assessment
Applied questions, a worked case and an individual explanation supported by calculations, diagrams or records.
Engineering Mathematics 1
Study mathematical reasoning for interpreting measurements and solving vocational problems. Practice centres on a worked problem portfolio using occupational data, drawing on units, ratios and numerical accuracy and algebraic relationships and equations. You will record findings, justify decisions and check units, numerical accuracy and the reasonableness of the result.
Learning outcomes
- Select a mathematical method suited to a stated problem.
- Show calculations with consistent units and clear assumptions.
- Check the result against an independent estimate or known constraint.
Main topics
- Units, ratios and numerical accuracy
- Algebraic relationships and equations
- Graphs, tables and interpretation
- Geometry and measurement applications
- Descriptive statistics and variation
- Model assumptions, checking and technical reporting
Practical task
For Engineering Mathematics 1, prepare a worked problem portfolio using occupational data in a electrical power engineering setting. Use supplied records, a realistic simulation or authorised supervised practice. Include your working and checks of units, numerical accuracy and the reasonableness of the result.
Assessment
Applied questions, a worked case and an individual explanation supported by calculations, diagrams or records.
Engineering Mathematics 2
Study mathematical reasoning for interpreting measurements and solving vocational problems. Practice centres on a worked problem portfolio using occupational data, drawing on units, ratios and numerical accuracy and algebraic relationships and equations. You will record findings, justify decisions and check units, numerical accuracy and the reasonableness of the result.
Learning outcomes
- Select a mathematical method suited to a stated problem.
- Show calculations with consistent units and clear assumptions.
- Check the result against an independent estimate or known constraint.
Main topics
- Units, ratios and numerical accuracy
- Algebraic relationships and equations
- Graphs, tables and interpretation
- Geometry and measurement applications
- Descriptive statistics and variation
- Model assumptions, checking and technical reporting
Practical task
For Engineering Mathematics 2, prepare a worked problem portfolio using occupational data in a electrical power engineering setting. Use supplied records, a realistic simulation or authorised supervised practice. Include your working and checks of units, numerical accuracy and the reasonableness of the result.
Assessment
Applied questions, a worked case and an individual explanation supported by calculations, diagrams or records.
National Studies
Study the relationship between citizenship, public institutions and working life. Practice centres on a local public-service case review, drawing on constitutional principles and public institutions and citizenship and civic responsibilities. You will record findings, justify decisions and check the distinction between fact, opinion and unsupported claims.
Learning outcomes
- Explain the role of public institutions in a community issue.
- Compare perspectives using identifiable evidence.
- Prepare a reasoned civic or workplace contribution.
Main topics
- Constitutional principles and public institutions
- Citizenship and civic responsibilities
- Zimbabwean history and national development
- Cultural diversity and community participation
- Work, enterprise and public services
- Evidence, public debate and responsible participation
Practical task
For National Studies, prepare a local public-service case review in a electrical power engineering setting. Use supplied records, a realistic simulation or authorised supervised practice. Include your working and checks of the distinction between fact, opinion and unsupported claims.
Assessment
Applied questions, a worked case and an individual explanation supported by calculations, diagrams or records.
Entrepreneurial Skills Development
Study the development of a viable small enterprise from a defined customer need. Practice centres on a small-enterprise plan and test record, drawing on customer problems and enterprise opportunities and products, services and value propositions. You will record findings, justify decisions and check whether the financial assumptions and customer evidence support the proposal.
Learning outcomes
- Define a customer need and a practical enterprise response.
- Estimate resources, costs and cash requirements.
- Revise a business proposal using evidence from a small market test.
Main topics
- Customer problems and enterprise opportunities
- Products, services and value propositions
- Startup resources and operating costs
- Pricing, cash flow and basic records
- Market testing and customer feedback
- Business risks, responsibilities and growth choices
Practical task
For Entrepreneurial Skills Development, prepare a small-enterprise plan and test record in a electrical power engineering setting. Use supplied records, a realistic simulation or authorised supervised practice. Include your working and checks of whether the financial assumptions and customer evidence support the proposal.
Assessment
Applied questions, a worked case and an individual explanation supported by calculations, diagrams or records.
Practical integration
Africa Indigenous Language: African Kalanga 201Compulsory graduation subject · Year 2
Develop African Kalanga through applied communication for engineering, science and technology. Practise with authentic tasks, feedback and reflection across the programme year.
Learning outcomes
- Use African Kalanga accurately for Year 2 study and practice.
- Explain language choices to the intended audience.
- Revise your work using speaker and facilitator feedback.
Main topics
- Workplace vocabulary
- Questions
- Instructions
- Short messages and feedback
Practical task
Prepare and test a bilingual message for a realistic community or workplace situation.
Assessment
Submit the practical work, a brief reflection and evidence of language review. Assessment checks meaning, audience fit and improvement after feedback.
Entrepreneurship, Creativity and Innovation 301Compulsory core module · Level 3
Plan and evaluate the practical introduction of an innovation in a relevant organisation or community. Apply this learning to National Certificate in Electrical Engineering through an authentic brief and feedback from an appropriate audience.
Learning outcomes
- Investigate a defined opportunity and explain the evidence behind it.
- Develop and refine a creative response that fits the people and setting.
- Evaluate feasibility, ethical implications and the quality of the result.
Main topics
- Implementation planning
- Stakeholder engagement
- Resources and finance
- Monitoring and impact
- Learning from a pilot
Practical task
Prepare and defend a pilot plan for an innovation relevant to National Certificate in Electrical Engineering. Set measures of success, identify risks and explain how results will guide improvement.
Assessment
Submit a pilot plan, budget assumptions, evaluation measures and an individual rationale. Assessment considers the quality of the evidence, the response to feedback, feasibility and your individual explanation.
African History and Pan Africanism 301Compulsory core module · Level 3
Evaluate the legacy of Pan Africanism in continental and regional cooperation, culture and public life. Apply historical inquiry to a heritage, community or professional issue, recognising both achievements and contested interpretations.
Learning outcomes
- Evaluate continuity and change from the Organisation of African Unity to the African Union.
- Assess a contemporary Pan African issue using historical evidence and contrasting views.
- Develop an ethical, well-sourced project connecting African history with your field or community.
Main topics
- The African Union, regional cooperation and Southern African integration
- Agenda 2063, development and debates about continental priorities
- Citizenship, migration, diaspora connections and cultural exchange
- African knowledge, heritage, public history and contested narratives
- Research ethics, source attribution and evaluation of a community or professional project
Practical task
Prepare a sourced heritage or civic-learning project connected with your field or a Southern African community. Explain its historical basis, audience, permission needs and limits. Obtain consent if you conduct interviews.
Assessment
Submit a project brief, an annotated source portfolio, a public-facing learning resource and an evaluation of your interpretation. Assessment considers evidence, ethical practice, historical reasoning and usefulness to the intended audience.
Learning resources
Project
Bring together the programme's technical learning in a focused project. Choose a manageable problem involving electrical engineering technology 1, communication and computer skills. Define the required output, gather evidence and develop a justified response. Present the completed work with its method, results and limitations, then explain the improvements made following feedback.
Learning outcomes
- Define a feasible project with clear success criteria.
- Develop and evaluate a response using technical evidence.
- Present the completed project and defend its conclusions.
Main topics
- Project problem, purpose and scope
- Review of relevant technical evidence
- Plan, resources and milestones
- Implementation or structured investigation
- Testing, interpretation and limitations
- Final report, demonstration and reflection
Practical task
Complete supervised electrical training-board or laboratory tasks with diagrams, inspection records and test results. Live work requires authorised supervision.
Assessment
An approved brief, progress evidence, the final output and an individual presentation are assessed against the stated project criteria.
On The Job Education And Training
Apply your learning through agreed duties in a supervised workplace. You will connect electrical engineering technology 1, communication and computer skills with routine service or production responsibilities. Keep evidence of preparation, work completed and feedback. Review your progress with the supervisor and explain how your decisions affect quality, safety and other people.
Learning outcomes
- Complete agreed duties within the supervised role.
- Maintain a traceable record of work and feedback.
- Evaluate progress and identify specific development needs.
Main topics
- Workplace induction and agreed duties
- Applying technical knowledge to real work
- Work records and evidence of contribution
- Team communication and professional conduct
- Supervisor feedback and skills development
- Reflective review and future learning priorities
Practical task
Complete supervised duties linked to National Certificate in Electrical Engineering. Keep a logbook, samples of permitted work and supervisor feedback.
Assessment
Assessment uses the agreed work plan, supervisor observation, work evidence and an individual reflective discussion.
Workshop Practice (Skills Proficiency)
Demonstrate the practical skills developed across the programme. Tasks integrate electrical engineering technology 1, communication and computer skills within an agreed work brief. You will prepare resources, carry out the authorised task and check the result. Your evidence should show consistent performance, accurate records and an explanation of decisions within your learner role.
Learning outcomes
- Plan and complete an integrated task to agreed criteria.
- Demonstrate safe and consistent practical performance.
- Explain the result and correct identified weaknesses.
Main topics
- Interpreting an integrated work brief
- Preparing tools, information and resources
- Demonstrating the required technical skills
- Checking output against agreed criteria
- Responding to faults and assessor feedback
- Presenting evidence and explaining decisions
Practical task
Complete supervised electrical training-board or laboratory tasks with diagrams, inspection records and test results. Live work requires authorised supervision.
Assessment
Direct observation, the completed output, a quality-check record and oral questions provide the evidence for this subject.
Practical Learning
Authentic e-learning at BMIT
BMIT uses Authentic E-Learning to connect your studies with practical problems in your field. You use digital resources to investigate a realistic brief, make decisions and produce work for a defined purpose and audience. Your qualification's activities below put this approach into practice.
How you will learn
The approach draws on nine elements of authentic learning:
- Realistic contexts: Work with situations relevant to your profession or community.
- Purposeful tasks: Investigate a substantial problem with more than one possible solution.
- Expert examples: Examine demonstrations and examples of professional reasoning.
- Different perspectives: Compare sources and consider the needs of different people.
- Collaboration: Share ideas and review work with peers, while showing your own contribution.
- Reflection: Record what worked, what changed and what needs improvement.
- Explanation: Present your reasoning and support your decisions with evidence.
- Guidance: Use tutor feedback and structured support as you develop independence.
- Authentic assessment: Demonstrate learning through the task and its practical outcome.
From a brief to a practical outcome
Start by identifying the problem, intended audience and assessment criteria. Investigate relevant evidence, plan your response and develop an initial solution. Use discussion and feedback to test your ideas, then revise your work and explain your choices.
Digital tools support research, collaboration, simulation and the presentation of evidence. Your output depends on the module. Examples include a business proposal, technical design, tested program, investigation report or community resource. Keep drafts, calculations, test results and reflections to show how your work developed.
The module brief sets the required tasks, individual and group responsibilities, submission format and assessment criteria. The practical activities and supervision requirements for this qualification are set out below.
Research informing this approach
- Herrington, J. Authentic Learning: nine elements of authentic learning.
- Lombardi, M. M. (2007). Authentic learning for the 21st century: An overview. EDUCAUSE Learning Initiative.
- Parker, J., Maor, D. and Herrington, J. (2013). Authentic online learning: Aligning learner needs, pedagogy and technology. Issues in Educational Research, 23(2), 227–241.
Use guided online cases and data tasks to prepare for practical work. Laboratory, field or equipment tasks require suitable facilities and supervision.
What you will practise
- Programmable Logic Controllers: For Programmable Logic Controllers, prepare a measurement or control-loop investigation in a electrical power engineering setting. Use supplied records, a realistic simulation or authorised supervised practice. Include your working and checks of calibration evidence, response behaviour and stated operating limits.
- Engineering Mathematics 2: For Engineering Mathematics 2, prepare a worked problem portfolio using occupational data in a electrical power engineering setting. Use supplied records, a realistic simulation or authorised supervised practice. Include your working and checks of units, numerical accuracy and the reasonableness of the result.
- On The Job Education And Training: Complete supervised duties linked to National Certificate in Electrical Engineering. Keep a logbook, samples of permitted work and supervisor feedback.
Applied project
Complete supervised electrical training-board or laboratory tasks with diagrams, inspection records and test results. Live work requires authorised supervision.
Evidence and feedback
- A completed practical task with an explanation of the method, evidence and decisions.
- Suggested practical assessment: demonstrate a procedure and submit a portfolio showing your method, results and quality checks.
- Explain your decisions to the assessor and use feedback to improve the completed work.
Assessment considers the practical work you submit, the evidence behind your decisions and how you respond to feedback.
African History and Pan Africanism practical learning
- African History and Pan Africanism 101: Create an annotated timeline or digital learning poster on a selected African society or historical development. Compare at least two credible sources and explain one connection with your field of study.
- African History and Pan Africanism 201: Develop a comparative case study of a liberation issue or Pan African debate relevant to Southern Africa. Use a historical document alongside a scholarly account and explain differences in purpose and interpretation.
- African History and Pan Africanism 301: Prepare a sourced heritage or civic-learning project connected with your field or a Southern African community. Explain its historical basis, audience, permission needs and limits. Obtain consent if you conduct interviews.
Career Prospects
These examples show work across this qualification pathway, from support roles to specialist and management posts. Your entry point depends on your study, experience and employer requirements. Regulated roles require separate recognition or registration.
Top Career Paths and Job Titles
- Electrical workshop assistant: Records measurements and supports supervised installation or testing.
- Electrical engineering technician: Tests circuits and maintains equipment using approved procedures.
- Power systems technologist: Analyses system performance and develops safer, more reliable solutions.
- Renewable energy technician: Tests electrical equipment and records generation or storage performance.
- Power engineering manager: Plans network reliability, technical teams and safe project delivery.
Growth and Leadership Trajectory
- Starting practice: After meeting entry and any registration requirements, begin with the work represented by Electrical workshop assistant. Build supervised experience and keep a record of reliable work.
- Specialist progression: Relevant study and evidence from more complex projects support a move towards Electrical engineering technician or Power systems technologist.
- Leadership: With substantial experience, a role such as Power engineering manager adds responsibility for people, quality, budgets or service decisions.
Further Education to Boost Prospects
- Next study step: A related National Diploma in electrical and power engineering is a possible next level, subject to programme entry requirements.
- Continue at BMIT: National Diploma in Electrical Power Engineering Admission and any credit transfer are assessed separately.
Professional Certifications and Registrations
- Role-specific requirements: No single statutory credential covers every role in electrical and power engineering. Employers may require a relevant short course, supervised experience or role-specific licence. Check the requirements for the job and country before applying.
Potential Government and Industrial Employers
- Entrepreneurship and Small Business Management: Start or manage a small venture related to this field. Regulated work still requires the relevant professional registration or licence.
- Private and commercial organisations: Power utilities and renewable-energy firms.
- Specialist employers: Electrical contractors and manufacturers.
- Research and community organisations: Mining and industrial maintenance teams.
- Government departments and public bodies: Energy departments and municipal electricity services.